APPLICATIONS
Reviva provides the 6.7L in Long Block and Drop-In configurations for both RAM chassis cab and pickup applications, as well as the Sterling Bullet.
YEAR MODELS
Complete Drop-In: 2007-2013
Long Block Supreme: 2007-2016
Reviva utilizes torque plating methods for boring and honing to ensure block straightness, which reduces break-in time and crankcase pressure. In addition, Reviva uses OEM or equivalent pistons, rings, bearings, valves, and gaskets, making sure that this engine will stand the test of time.
All Reviva engines are assembled in the USA.
Block Configurations
LONG BLOCK INCLUDES:
- Block
- Rods
- Piston assemblies
- Head
- Rear seal plate w/ seal
- Oil filter assembly
- Water pump
- Fuel pump gear
- Oil pan
- Valve train (lifters, pushrods & rocker arms)
- Front cover & gear housing
- Crankshaft w/ gear
- Oil pump
- Camshaft w/ gear
- Oil cooler
- Gasket set
- Valve cover & rocker cover
- Breather cover w/ filter
- Intake cover
- Damper
COMPLETE DROP-IN INCLUDES:
ALL PARTS ON THE LONG BLOCK PLUS
- High-pressure fuel pump
- Low pressure lines w/ filter
- Injectors
- High pressure lines w/ manifold
- Intake cover & air intake heater
- Intake connection
- VG turbocharger w/ lines
- Exhaust manifold
- Sensors & switches
- EGR cooler w/ lines
- EGR valve
- Dipstick & dipstick tube
*ARP HEAD STUD KIT ALSO AVAILABLE
TO PLACE AN ORDER
Before calling to request price and availability, please gather the following information:
- The original engine serial number
- The original engine CPL number
The CPL and serial numbers are located on the valve cover.
REVIVA’S TESTING
Every engine is machined using state-of-the-art equipment and assembled using precise and repeatable methods. All engine production follows documented lean manufacturing processes and principles to create consistent quality and dependable outcomes.
Reviva’s Short Block, Long Block, and Long Block Supreme are 100% Sim tested before shipment.
Reviva’s Complete Drop-In engines are 100% dyno tested before shipment. Computer controls ensure that each engine dyno test is conducted under standard, repeatable settings. Every engine is run through a warm-up cycle; three separate cruise segments simulating light, medium, and heavy throttle conditions; maximum torque and horsepower tests; both high and low idle tests; and a black light leak detection test with dyed oil, coolant, and fuel.
WARRANTY COVERAGE
On-Road Complete Drop-In configurations: 2yr/unlimited mileage, 2nd year long block coverage only.*
Long Block configurations: 1 year/unlimited mileage.
Motorhome/RV Applications: 1 year parts only
(No labor or diagnostic reimbursement)
Some restrictions apply; see limited warranty details or call for more information.
©2017 Reviva, All Rights Reserved.
Reviva is an independent manufacturer and is not affiliated with Navistar, Ford, Cummins, General Motors, or Caterpillar.