APPLICATIONS
Reviva provides Long Block, Long Block Supreme, and a Complete Drop-In for the ISX CM871/EPA07.
ISX
Year Models: 2007-2010
Power Cylinder Update:
Reviva incorporates a carbon scraper ring, or commonly known as an anti-polishing ring, for better engine performance. The cylinder liner has an additional steel ring that is inserted on the counter bore of the cylinder liner. This scrapes the carbon from the sides of the piston which aids in reducing carbon polishing on the cylinder walls. These improvements are designed to decrease oil consumption, lower oil filter contaminants and reduce DPF regeneration.
Block Configurations
SHORT BLOCK INCLUDES:
- Block
- Rods
- Crank shaft & gear
- Piston assemblies
- Flywheel housing with rear seal
- Water pump
- Front cover
- Oil pan
- Oil filter
- Oil pump
- Front gear housing
- Oil cooler
- Gasket set
- Water filter
- Fuel filter
- Front and rear seal installed
LONG BLOCK INCLUDES:
ALL PARTS ON THE SHORT BLOCK PLUS
- Head
- Jake brake- If Applicable
- Valve train (Rocker Arms)
- Oil filter assembly
- Crankshafts
- Cam gears
- Valve cover
- Crankcase breather element
LONG BLOCK SUPREME INCLUDES:
ALL PARTS ON THE LONG BLOCK PLUS
-
Injectors
COMPLETE DROP-IN INCLUDES:
ALL PARTS ON THE LONG BLOCK SUPREME PLUS
- High-pressure fuel pump
- Low & high pressure lines
- Valve cover
- Intake cover & connection
- Damper pulley
- Turbocharger
- Exhaust manifold
- EGR cooler
- Sensors & switches
- Front motor mount
- ECM cooler
- Crankcase breather assembly
- Thermostat housing
All Reviva engines are assembled in the USA. To ensure our engines will stand the test of time, Reviva uses OEM or equivalent pistons, rings, bearings, valves and gaskets.
TO PLACE AN ORDER
Before calling to request price and availability, please gather the following information:
- The original engine serial number
- The original engine CPL number
The CPL and serial numbers are located on the valve cover.
REVIVA’S TESTING
Every engine is machined using state-of-the-art equipment and assembled using precise and repeatable methods. All engine production follows documented lean manufacturing processes and principles to create consistent quality and dependable outcomes.
Reviva’s Short Block, Long Block, and Long Block Supreme are 100% Sim tested before shipment.
Reviva’s Complete Drop-In engines are 100% dyno tested before shipment. Computer controls ensure that each engine dyno test is conducted under standard, repeatable settings. Every engine is run through a warm-up cycle; three separate cruise segments simulating light, medium, and heavy throttle conditions; maximum torque and horsepower tests; both high and low idle tests; and a black light leak detection test with dyed oil, coolant, and fuel.
WARRANTY COVERAGE
On-Road Complete Drop-In configurations: 2yr/unlimited mileage, 2nd-year long block coverage only.
Long Block configurations: 1 year/unlimited mileage.
Short Block configurations: 1 year/12,000 Miles.
Some restrictions apply; see limited warranty details or call for more information.
©2023 Reviva, All Rights Reserved. Reviva, Inc. is an independent manufacturer and is not affiliated with Original Equipment Manufacturers.
ISSUE: ISX_01